AirTurn PED Operating Manual - Page 7

Browse online or download pdf Operating Manual for Network Router AirTurn PED. AirTurn PED 16 pages. Hands-free bluetooth controller for smart ready tablets and computers

Print Page

Note: Holding down the pedal in any MODE for more than

two seconds will repeat the key action until released.

CHANGING THE MODE

Turn on the PED.

Press and hold the MODE button. The red

LED will flash once per second from 1 to 6

flashes. The number of flashes corresponds

to the same MODE number. Be sure to count the

flashes.

Release the MODE button following the number of

flashes that reflects the desired MODE. The blue and

red LEDs will flash together the number of times

indicating which MODE has been set.

Example: To set MODE 2 hold the MODE button for 2

flashes of the red LED, release and both LEDS will flash

2 times to confirm the MODE 2 setting.

Note: Once the MODE has been set, it will remain the

same until it is changed following the above steps.

CONNECTING AND PAIRING

Once the PED is powered on, the blue LED will blink 2

times per second until pairing is started.