Elite Acoustics A4BR8 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Speaker System Elite Acoustics A4BR8. Elite Acoustics A4BR8 5 pages. Portable rechargeable mini-pa speaker with bluetooth & 16 built-in effects

Print Page
1.
Battery Switch [37] is set to Connect.
2.
Make sure the SPEAKER VOLUME [3] control is down before you turn the POWER [38]
on.
3.
Connect the input of your microphone to the MIC IN [18]. Or you can connect a ¼" line
input from an instrument [17]. Connect an additional mono or stereo [20].
4.
Turn on the POWER [38] switch
5.
Connect device to Bluetooth® [40]
6.
Turn on your source signal(s) and adjust the volume on the source signal for normal
operation. Note if you are using an iPhone or iPad via Bluetooth®, set the volume on
your device about halfway. Maximum volume will distort.
7.
Adjust the SPEAKER VOLUME [3] to a comfortable level.
8.
Turn up GAIN [16] until there is a solid green light showing "signal" at desired level,
without a red "peak" light, indicating too much signal.
9.
For USB charging of your source device, use USB Port [39]
Power LED:
BLUE [1]: Indicate unit is ON
+48V LED [2]: Indicates Phantom Power is on
Monitor Output Controls
Speaker Volume [3]: Control speakers' volume level
Mono [4]: Changes speaker output to Mono sound
Equalizer [6]: Adjust Speaker High, Mid, and Low Frequency response
Peak LED [5]: RED indicate Signal Clip
Signal LED [5]: GREEN indicate Signal
Aux Input/Level [7]: Connect audio source with 1/8" jack from MP3/CD player
Effects Controls
Effects Mix [8]: Amount of effect being applied to Input
Rate/Decay [9]: Controls the duration of the effect
Effects Knob Selector [10]: Select effect of choice
EFX Bypass [11]: Turn effects on or off (When LED is on, the effects are turned off)
Channel 1
Gain [12]: Gain level control
Mute [13]: Mute channel
EFX Send Level [14]: How much output effect is being send out
Phase [15]: Change in phase of waveform
PAD [16]: Instrument 1 mute
Line In [17]: 1/4" TRS inputs
Mic In [18]: XLR for Microphone Input
Notch Filter [19]: Adjust feedback
Frequency [20]:
Equalizer [21]: Controls Low, Mids, and High
Channel 2
Gain [22]: Gain level control
Mute [23]: Mute channel
EFX Send Level [24]: How much output effect is being send out
Phase [25]: Change in phase of waveform
PAD [26]: Instrument 1 mute
Line In [27]: 1/4" TRS inputs
Mic In [28]: XLR for Microphone Input
Equalizer [29]: Controls Low, Mids, and High

QUICK START