Airuno Rigoletto 120 Installation & User's Instructions - Page 8

Browse online or download pdf Installation & User's Instructions for Ventilation Hood Airuno Rigoletto 120. Airuno Rigoletto 120 12 pages. Built-in cupboard hood

Print Page

3.2.2 Controls

The Aida can be controlled by either the soft touch

buttons on the unit (Fig 10) or by remote control (Fig

11). This allows the user to control the hoods on/off

functions and motor speeds.

Turns motor on at speed 2 and for turning the

motor off.

Increases motor speed.

Decreases motor speed.

Turns lights on

Timer button for turning the motor off after 10

minutes.

On first use the user will need to pair the remote

control with the extractor. With the hood turned off,

press and hold the plus button on the hood until the

LED flashes. Once this has happened press any button

on the remote control to check all functions are

working correctly.

4. Use & Maintenance

Before

beginning

maintenance work, turn the power off to the hood

by turning the main switch to 0 (OFF).

4.1 Changing the Light Bulbs

12V halogen G4 attachment: Use a screwdriver to

unscrew the glass support ring (Fig 12 & 23). Remove

the glass and change the light bulb. Replace the

protective glass and screw back the ring. The light

bulbs can be purchased in any electrical supply shop.

any

sort

cleaning

Fig 10

Fig 11

Dichroic lamp G4 attachment: Use a screwdriver to

remove and change the dichroic lamp (Fig 14).

LED spotlight replacement should only be carried out

by qualified technicians using only original spare

parts.

4.2 Cleaning the Metal Filters

The metal filters fitted in the hood should be washed

every 2-3 months, depending on how much the hood

is used, using hot water and a liquid detergent that is

not too aggressive.

The metal filters can be removed by the special

handle, unhooking the front part of the filter and

pulling it downwards (Fig 15).

Fig 12

Fig 13

Fig 14