DUCATIHOME 8500V-Rol/ DUCATI UP 70 (CTH29E) Installation Instructions Manual - Page 11

Browse online or download pdf Installation Instructions Manual for Garage Door Opener DUCATIHOME 8500V-Rol/ DUCATI UP 70 (CTH29E). DUCATIHOME 8500V-Rol/ DUCATI UP 70 (CTH29E) 19 pages. Garage door automation system 70 kg

Print Page

7. Fixing instructions

7.1 Fixing to door lintel

Fixing plate 828 must be fixed to the door lintel or the wall using 2 bolts (not supplied) in a vertical

position equivalent to half the width of the door. Ensure that you allow sufficient clearance so that the

moving door does not come into contact with the rail. See also Fig. 7

It is important that the structure in the fixing area be strong and sturdy. If necessary, reinforce it with a

steel plate.

Wall fixing plate Ref.

Fig. 22

828

Wall fixing bolt

Fig. 24

7.2 Fixing the drive head

Fix the motor unit to the ceiling with the two securing brackets, bending the ends at 90°. Fixing the rail

to the ceiling is optional, but it is recommended if using accessory 992012 (canopy door) to prevent

excessive flexing of the rail.

In this case, use cables to support the rail in a horizontal attitude. The cables (not supplied) can be

connected to the rail connecting sleeves between the lateral holes.

Fig. 25

Fig. 16

rail

Fig. 26

Fig. 23

Support the door-opener in a horizontal

attitude until it can be permanently

installed (Fig. 24).

Fig. 27

chain tensioner

Page 11