AnyDATA ACT210 User Manual - Page 9

Browse online or download pdf User Manual for GPS AnyDATA ACT210. AnyDATA ACT210 12 pages. Cdma vehicle tracker

Print Page

HANDING THE

4.1 S

1. Most of vehicle has an OBD-II (On Board Diagnostics) connector, which

is located within 2 feet of the steering wheel.

2. The installation is very easy, just put the ACT210 to the OBD-II

connector in user vehicle.

3. The ACT210 will power on automatically from vehicle battery and start

initiation for CDMA network access.

4. After install of device to vehicle, all services are served by server.

4.2 P

OWER SUPPLY FROM VEHICLE

1. After insertion of ACT210 to OBD-II connector, the device has

automatically power-on with the car battery, typically 9~20V.

2. If the engine has off, then the device decide to power off the OBD

interface

unauthorized movement function.

If the engine has on, then the device work on the OBD interface

circuit, which is charge of gathering the vehicle information such

as fuel gauge, speed, engine RMP, and so on to report it to LBS

server via the CDMA network.

GPS L

EHICLE

OCATOR

(

TYPICAL

circuit,

and

Personal GPS Locator Users Manual (ACT210)

13.5V)

run

the

CDMA

with

GPS

for

9/12

the