Anyload DD-KC1 Operation Manual - Page 7

Browse online or download pdf Operation Manual for Measuring Instruments Anyload DD-KC1. Anyload DD-KC1 13 pages. Digital weight indicator
Also for Anyload DD-KC1: Instruction Manual (11 pages)

Print Page

4.6 Changing Units

Press the

4.7 "Hold" Function

Once the

4.7.1 The CPU will send the weight data into RS232 socket.

4.7.2 The weight will remain on the display for 120 seconds after the item has been removed

from the scale so the weight can beeasily read.

a) Place the item on the scale platform.

b) Wait for the display to show a stable weight.

c) Press the

platform. The item's weight reading will remain on the display for 120 seconds.

d) When you want to quit the hold function, press the

disappear.

4.8 Print Function

Press and hold the

will export to the computer or the serial printer.

4.9 Counting Sample

a. During counting mode, remove unrelated objects on the platform, then press

button to revert to zero;

b. Press

"ADD10".

c. "ADD10" means that 10 objects to be weighed should be added onto the platform.

Attention: The weight of each sample should be higher than the scale's minimum

division value; otherwise, the window will display "NO".

d. If you want to change the sampling quantity, please press the

change the quantity; if you do not need to sample again, press the

5 |

A n y l o a d D D - K C 1 M a n u a l V ( 1 6 0 3 )

button to switch the unit of measurement, kg --- lb--- pcs--- kg.

key is pressed:

key. Display will show 'HOLD'. Remove the item from the scale

for 3 seconds, the buzzer will sound, and the weight data

button to switch the unit into "PCS", and the window will display

key and 'HOLD' will

button to