Anyload A2A-D2 Product Manual - Page 3

Browse online or download pdf Product Manual for Amplifier Anyload A2A-D2. Anyload A2A-D2 8 pages. (v1611) load cell amplifier

Print Page

Introduction

Thank you for choosing Anyload A2A-D2 load cell amplifier. A2A strain gage

amplifier provides load cell and transducer signal conditioning. It is designed for

converting mV signal from load cell output into a 4~20mA or 0

A2A strain gage amplifier is a DC powered and can drive up to 4 x 350Ω load

cells or 8 X 700Ω load cells or 8 X 350Ω load cells or . It can be connected

directly to 1 or 2 load cells or to more than 2 load cells through a junction

box. The amplifier is equipped with individual adjustable resistors and has a

wide input signal of 0

manual here provides the installation, operation and calibration procedures of

the product.

Preinstalled GORE breather vent with capacitive stainless steel screws:

Only simple tools like small size slotted screw driver and Philips screwdriver are

required for connecting cables during installation, adjusting the unit during

calibration and installation of enclosure cover.

Model

Max Power

Power Supply

Input Range

Output Signal

Working Temperature

Max Input Offset voltage

Min. Common Mode Ratio

(G=10)

Enclosure Material

2 |

ANYLOAD A2A-D2 Amplifier Product Manual (V1810)

±36mV and output signal of

°C (°F)

µV

10V or 2 to 20mA. The

A2A-D2

4.35

±36

4-20

±10

-10 .... +50(14 .... 122)

100

Aluminum

10V signal. The