ANYTEC 868 CAB Manual - Page 9

Browse online or download pdf Manual for Boat ANYTEC 868 CAB. ANYTEC 868 CAB 16 pages.

Print Page

Manual Anytec 868 CAB

2. Hull

2.1 Hull

The hull is made of aluminium with keel reinforcement, transverse frame ribs and

longitudinal reinforcements. Base plates are 4 mm thick, freeboard 4 mm. The hull structure is

of the following quality;

Plates: EN AW -5083-H321

Profiles: EN AW-6082-T6

2.2 Deck

The deck is made of aluminium, with transverse and longitudinal profiles / reinforcements.

The aluminium used to make the deck and superstructure is of the following quality;

Plates: EN AW -5754-H111

Profiles: EN AW-6082-T6

2.3 Fendring

The boat is fitted with a rubber D-moulding. Treat this rubber strip list at least once a year; we

recommend using an appropriate rubber maintenance agent.

O- repairs must be carried out immediately in the event of any damage. Get in touch with

your nearest dealer

. Deck equipment, tanks

3.1 Anchoring

Inspect the anchor, shackle and rope attachments regularly. If the anchor gets caught on the

bed, the anchor rope must be secured in a bollard before carefully attempting to pull the

anchor free using engine power.

3.2 Mooring

Elasticity and breaking load are important factors when selecting ropes. The breaking load

may be reduced by 20-50% on account of knots and splices. Use mooring springs as buffers in

order to increase the service life. In winter, rinse the ropes in freshwater and store them when

dry.

3.3 Masts, flagpole

Always check masts at regular intervals, searching for any play or cracks.

3.4 Handrails

Check handrail mountings at least once every season.

Anytec Sweden AB

Magasinsgatan 7

903 27 UMEÅ

0770-220 210

https://www.boat-manuals.com/

2017 (REV A)

- 9 -