AnyTone AT888 User Manual - Page 14

Browse online or download pdf User Manual for Radio AnyTone AT888. AnyTone AT888 20 pages.

Print Page

Programming Software Installing and Starting (in windows XP system)

Double click "QPS888 setup.exe", then follow the installing instruction.

Install USB Cable Driver Programme

Click start menu in computer, under "ALL PROGRAMS" menu,

choose and click "USB To Com port" in QPS888 program, install

"USB To Com port" driver by indication.

Connect the optional PC50 USB Programming cable to USB port in

PC with transceiver.(As pic 1)

Double click QPS888 shortcut or click QPS888 in procedure index

of start menu, choose serial com port as indicated then click OK to

start programming software. (As pic 2)

According to instruction, select correct "COM Port"(As pic 3), then

click "OK" to start programming software.

Note:

Even in same computer, the selective COM Port is different when

USB cable connects with different USB port.

You shall install software before connecting the USB cable line. Switch

on transceiver before writing frequency. You had better not switch on or

off the power supply of transceiver when it is connected with computer,

otherwise, it will make transceiver unable to read or write frequency. In

this case, you have to turn off programming software, pull out USB cable.

then reinsert USB cable and open software, then rechoose COM Port,

it will turn into normal operation. Therefore, please connect transceiver

with computer after switching on the transceiver. Don't restart transceiver

power when it is connected with computer.

This software has product identify system, so when firstly installing the software, you have to connect the products, otherwise you can not start the software.

(As pic 1)

(As pic 2)

(As pic 3)