AnyTone AT-7100 User Manual - Page 11

Browse online or download pdf User Manual for Repeater AnyTone AT-7100. AnyTone AT-7100 20 pages. Gsm+dcs+3g/umts/wcdma tri-band mini repeaters

Print Page
GETTING ACQUAINTED
BS:Donor antenna
1
MS:Service antenna
2
GSM:uplink gain adjustment switch
3
DCS:uplink gain adjustment switch
4
3G/UMTS/WCDMA:uplink gain
5
6
GSM:downlink gain adjustment switch
DCS:downlink gain adjustment switch
7
3G/UMTS/WCDMA:downlink gain
8
GSM:uplink signal indicating light
9
DCS:uplink signal indicating light
10
3G/UMTS/WCDMA:uplink signal
11
GSM:downlink signal indicating light
12
DCS:downlink signal indicating light
13
3G/UMTS/WCDMA:downlink signal
14
Attention:
Just one band is occupied when cell phone is working, therefore, in
general usage of tri band repeater, only downlink and occupied band for uplink
indicating light illuminate.
6
adjustment switch
adjustment switch
indicating light
indicating light
S w i t c h m o v i n g u p a s 1 m a k e s g a i n
attenuation, while switch moving down as 0
makes gain remain original. Factory default
setting: all switch down. For example,
when switch 1 and switch 4move up, the
corresponding truth table attenuates 9dB.
When BS connection port receives GSM/
DCS/3G signal which surpasses-50dBm,
indicating light lightens or twinkles. Now
the device receives well and it's able to
communicate normally.
When BS connection port receives GSM/
DCS/3G signal with surpasses -60dBm,
i n d i c a t i n g l i g h t s h o w s i n G r e e n . N o w
the device receives well and it's able to
communicate normally.When system internal
self-excitation, the indicating light from Green
to Orange, to overcome the self-excitation
please reference to common problems.