Anyware Instruments Moodulator User Manual - Page 15

Browse online or download pdf User Manual for Synthesizer Anyware Instruments Moodulator. Anyware Instruments Moodulator 19 pages.

Print Page

MODULATION CONTROL

Modulation Control is a very useful feature of the MOODULATOR that allows you to make sounds way more

complex than what most monophonic synths can.

The idea is this: the filter might be modulated by one of 3 sources (White noise, LFO or OSC2), but at the same

time, the depth can be modulated by the Filter FM knob and either the Mod env or the Mod wheel. Considering

that the level of the Mod env itself can be modulated by the Mod wheel, this system allows a lot of flexibility.

The signal flow on this case goes from bottom to top, beginning with the source and going up.

SOURCE (switch)

One of the following sources can be selected: White, LFO, and OSC2.

FILTER FM (knob)

This knob controls the amount of modulation that goes from the source to the filter. If the switch above it is

set to "on", the signal goes to the Modulation Control section for further processing. If it's set to "direct",

this knob controls the modulation source directly to the VCF cutoff.

ON/DIRECT (switch)

This switch defines if the signal from the sources and Filter FM knob goes to the Modulation Control

section (ON) or it goes directly to the VCF cutoff (Direct).

MOD ENV / WHEEL (switch)

Here you select the "modulator of the modulation". You can choose between the Mod env or the Mod wheel.