Anywhere Fireplace Tribeca II User Manual - Page 3

Browse online or download pdf User Manual for Indoor Fireplace Anywhere Fireplace Tribeca II. Anywhere Fireplace Tribeca II 4 pages. Fireplace

Print Page

ASSEMBLY INSTRUCTIONS

Step 1

Take fireplace frame (Part A) out of plastic bag and lay the

backside onto a carpet or towel with opening facing up.

Step 3

Attach the stand to the fireplace frame using the 4 .5" screws

(Part K) using the provided hex tool.

Step 5

Insert plastic washers (Part L) into the holes on the glass base

(Part I) and secure the glass base onto the stand using the thick

.75" screws (Part M) using the hex tool provided. Be sure not to

over tighten. Until screws are secured, glass may not be stable. Be

careful and insure that glass base does not fall before securing.

Step 2

Turn your fireplace upside-down onto its top and place the stand

(Part H) onto the fireplace. Make sure the flanges that stick out

line up with the 4 holes pre-drilled in the fireplace.

Step 4

Now place the black glass base (Part I) over the stand so that the

holes in the glass line up with the holes on the bottom of the

stand. Make sure the rubber feet on the glass base are facing you.

This will become the bottom of the fireplace.

Step 6

Turn your fireplace over onto the base so that it is now standing

right side up and place the burner (Part B) into the recessed hole

in your fireplace frame.