Concrete Tool Importers surspider ZKZ-40A Owner's Manual - Page 5
Browse online or download pdf Owner's Manual for Power Tool Concrete Tool Importers surspider ZKZ-40A. Concrete Tool Importers surspider ZKZ-40A 12 pages. Intelligent rebar tier
Print Page
•
ONLY USE THE AUTHORISED BATTERY PACK, if the tool is
connected to a power supply other than the authorised pack, such
as a rechargeable battery, dry cell, or a storage battery for use in
cars, the tool may be damaged, breakdown, overheat, or even catch
on fire. Do not connect this tool to any power supply except the
Surspider battery pack.
•
TO ENSURE MAXIMUM PERFORMANCE, FULLY CHARGE THE
BATTERY BEFORE USE. A new battery pack or one not used for
extended periods may have self-discharged and thus may need
recharging to restore it to a fully charged condition. Before operating
the tool, make sure to charge the battery pack with the Surspider
battery charger.
•
BATTERY CHARGING PRECAUTION. Only use the Surspider
battery charger as failure to do so may cause the battery to overheat
or catch fire leading to serious injury. Only charge the battery from a
230/240V 50Hz power supply to avoid overheating or inadequate
charging possibly causing serious injury.
•
Never use a transformer
•
Never connect the battery charger to a DC Generator power
supply
•
Avoid charging the battery pack in the rain, in a damp place, or
where water is present. Charging a damp or wet battery pack will
cause an electric shock or a short circuit that may lead to damage
from burning and even the tool catching fire.
•
Do not touch the power cord or plug with wet hands or gloves.
This may cause injury from electric shock
•
Do not cover the battery charger while the battery pack is being
charged. This will cause overheating and damage from burning or
the charger may catch on fire.
•
Keep the battery pack and charger away from heat and flames
7.
Concrete Tool Importers Ltd
0800 727 333
•
Do not charge the battery pack near flammable materials
•
Charge the battery pack in a well ventilated place. Avoid
charging the battery pack where it will be in direct sunlight.
•
Charge the battery pack in a temperature range of 5 - 40ºC
•
Avoid continual use of the battery charger. Rest the charger for
15 minutes between charges to avoid functionality problems with the
unit.
•
Any objects that block the ventilation holes or battery pack
receptacle may cause electric shock or problems functioning.
Make sure that the charger is clean of dust and other foreign
materials.
•
Handle the power cord carefully. Do not carry the battery charger
by its power cord. Do not use the power cord to disconnect it from
the wall socket; this will damage the cord and break the wires or
cause a short circuit. Do not let the power cord contact sharp edged
tools, hot materials, oil, or grease. A damaged cord must be repaired
or replaced.
•
Do not charge non rechargeable batteries with this charger
•
This charger is not intended for use by children. Children should
be supervised to ensure they do not play with the charger
•
Do not let the terminal (metal components) of the battery pack
short circuit. A short circuit in the terminal will generate a large
current, causing the battery to overheat and be damaged.
•
Do not leave or store the tool in a vehicle or in direct sunlight
during summer. Leaving the tool in high temperature conditions
may cause the battery pack to deteriorate.
•
Do not store a fully discharged battery pack. If a fully
discharged battery pack is removed from the system and left for
a long period of time, it may become damaged. Recharge the
battery immediately when it has been discharged.
Concrete Tool Importers Ltd
0800 727 333
8