Abtus ABT4650 RouteScan Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Measuring Instruments Abtus ABT4650 RouteScan. Abtus ABT4650 RouteScan 17 pages.

Print Page

5.0 Software Features

Settings

5.1

Within the settings page (Figure 7) it is possible to create/edit any number of scan

parameter sets. The parameters in each set define how a scan is performed:

•

Start Angle

•

End Angle

•

Increment (Resolution)

•

Absolute/Relative

Predefined settings can be selected to suit the structure being scanned

1. Select 'Settings' from the options screen (Figure 1)

2. To create a new set of parameters, select 'Create Profile' from the

Settings Profile drop down menu. 'New profile' will now be displayed, click

and hold this in order to rename it

3. Click inside the corresponding box to change the various parameters –

use the keypad to do this

4. If a Bluetooth connection to the RouteScan exists, it is possible to set the

Start and End Angle visually:

•

Click and hold in either the 'Start Angle' or 'End Angle box

•

Click 'Turn Laser On'

•

Point the laser at the desired point

•

Click 'Select 'Angle'

5. An absolute or relative reading can be selected by ticking or un-ticking the

Absolute tick box

5.2

To review recorded Data Files click the 'View Results' button in the 'Options'

screen. Select the file you wish to review from the drop down box at the bottom of

the screen. Toggle between file types (see section 5.3) using the button in the

bottom right of the screen.

Figure 7

4650-1 Issue 04