Aobosi AMR520 Instruction Manual - Page 4
Browse online or download pdf Instruction Manual for Juicer Aobosi AMR520. Aobosi AMR520 16 pages. Slow juicer
Print Page
edibility and does no harm to health.
This product is equipped with intelligent protection chips, making it stop
11.
automatically for every 20 minutes' operation. And in such case, rest it for
20-30 minutes before restarting it, so as to cool the motor down and
prolong product servicelife.
This product is designed to limit the flow rate. During processing of
12.
any hard material, the motor will be locked and the current will rise up.
When the current goes higher than 1.3A, the equipment will beep
and the motor will stop operation for over-current protection and
extension of life span.
In case that current limit protection is triggered or the motor is locked
13.
and stops automatically, disconnect the power supply and keep the
switch in position "0", and press Rotate Backwards button on the power
switch, and then discharge the food material and then press Rotate
Forwards to restart the machine. If the problem continues, it is
recommended to remove any food material inside
so as to protect the motor.
After the completion of operation, remove any removable part
14.
only after the motor/
stopped rotating and the power has been disconnected.
Any part in contact with food material is clean, safe and reliable in
15.
compliance with related food hygiene codes.
To protect against risk of electrical shock, do not put the motor base in
16.
water or other liquid.
Do not use any steel wool, abrasive cleaning agent or corrosive
17.
liquid such as gasoline or acetone to clean this product.
This product should be stored in a place that children can't reach. Not
18.
allow persons with unsound extremities and sensation or mental
disorders and persons who are short of related experience and
knowledge( including children ) to use or play with this product.
This product is used for individual or family only.
19.
This product is of Class-I protection grade, and the socket used for it
20.
must be grounded properly.
/shredder/slicer/grinder screw has
auger
4
before restart
auger