Abtus AV508-S User's Operation Manual - Page 2

Browse online or download pdf User's Operation Manual for Racks & Stands Abtus AV508-S. Abtus AV508-S 2 pages. Plasma/ lcd display single arm ceiling mount

Print Page
User Operation Guide
PACKAGE CONTENTS
Item 1
Item 2
Wall Arm - 1 set
Screw bag - 1 set
INSTALLATION
Step - 1— Marks position of the Wall Plate mounting holes.
1(a) - For concrete wall, drill and insert Wall Anchors (in Item 2) into concrete wall. Secure Wall
Arm (Item-1) with Lag bolts and Washers provided on the wall.
1(b) - For wood stud, drill and secure Wall Arm (Item-1) with Lag bolts and Washers provided
on wooden wall.
Note: do not use Wall Anchor for mounting on wooden wall.
1(c) - cover the screws with the Covers (Item-3)
Wall anchors
Hammer
Gently
Lag Bolts
Push in
and Washers
1(a) - for concrete wall
UP
LCD TV
Item 3
Covers - 2 pcs
Cover
Wall Stud
1(b) - for stud wall
Step - 2 — Fix 2x screws onto back of LCD TV
(in up-right position) at the upper set of holes.
Leave screws about 5-6mm away from holes.
*NOTE: if screws provided can't fi t, please refer to
the Plasma TV user manual for the correct
mounting thread screw size.
About 5-6mm
away from hole
Step - 3 -Lift and insert LCD TV with screws through the "key" holes on the front plate of the Wall Arm
mounted on the wall done in Step-1. Secure with 2x screws at the bottom of the front plate. Tighten all
screws.
Step - 4 - For Cable management, remove
the End caps and slide the Side covers out
of the arms. Run cables in the space of the
arm. When done, Side covers can be slide
back or clip from the front until hear a "click"
sound. Cover back the End caps.
Step - 5— Adjustment:
5(a) Tilting—loosen the bottom screws at
curved slot hole area, grasp the upper and
lower edges of the Plasma, pull or push the
Plasma to tilt it to a desired viewing angle.
Tighten all screws.
5(b) Leveling — loosen screws as shown.
Grasp the left and right edges of the Plasma,
roll up or down to level the Plasma.
5(a) - Tilting
5(b) - Leveling
NOTE: Do consult a qualifi ed and authorized service technician if you encounter any technical
diffi culties. We are not liable for any damage or injuries arising from any improper installation or
mishandling.
INSTALLATION
"key" hole
Front plate
LCD TV
Secure screws
Side covers
End caps
5(a) - Loosen
2x screws
*Specifi cations are subject to changes without notice.
Cables
5(b) - Loosen
2x screws