AirVerter Gravity MicroFlex MFG-3100 User Manual - Page 5

Browse online or download pdf User Manual for Paint Sprayer AirVerter Gravity MicroFlex MFG-3100. AirVerter Gravity MicroFlex MFG-3100 14 pages. Hvlp paint spray system

Print Page

Vertical Fan Pattern

MF-202

CLEANING YOUR GRAVITY MICROFLEX SPRAY GUN

Spray gun performance is directly related to how well it is cleaned after each use.

This is particularly true for the small orifices in the MicroFlex.

Always de-pressurize system prior to any maintenance or disassembly procedure.

Disconnect all air and fluid hoses prior to performing any maintenance operation.

1. Run or pump solvent through the gun to

completely remove paint from the fluid

chamber. Flush passages thoroughly, as

brushes or other devices will not reach most

parts of the fluid chamber. Note: The Fluid

Hose provided is not designed for repeated

detachment and reattachment to the Hose

Barb or Spray Head. If flushing with solvent

cannot clear a clogged Fluid Hose, replace

the Fluid Hose.

2. Wipe the Handle and Needle (GG-014)

clean with solvent and a clean soft cloth.

Use caution to avoid damaging or bending

the needle. Re-lubricate the needle with

Vaseline.

3. Unscrew the Pattern Control Ring (GG-001)

from the Spray Head Assembly to separate

the Adapter Collar (MFG-002) from the

Spray Head Assembly exposing the Fluid

Hose (MF-010).

4. With the wrench provided, remove the

Needle Seat (MFG-3006) from the Spray

Head Assembly. Use caution to avoid

damaging or bending the Hose Barb (MF-

012). Be careful not to lose the Anti-Friction

Washers (MF-003).

5. Unscrew the Hose Barb from the Needle

Seat. Clean the Needle Seat with brush

provided.

6. Unscrew the MicroFlex Air Cap (MF-202 or

MF-203) and clean with solvent ensuring all

passages are absolutely clean.

DO NOT OPERATE SPRAY GUNS WITHOUT PERSONAL SAFETY EQUIPMENT

AirVerter

Gravity MicroFlex Spray Gun



Horizontal Fan Pattern

MF-202

WARNING!

7. Unscrew the MicroFlex Spray Head (MF-

8. Clean the MicroFlex Spray Head (MF-200)

9. Use the round brush supplied to clean

10. Inspect to make certain that all paint residue

11. Wipe all parts dry with a clean cloth before

Round Pattern

200) from the Flexible Extension (MF-008).

with solvent ensuring all passages are clean

and free of obstructions. Use caution to

avoid damaging or bending the fluid nozzle

tip.

Needle Packings (GG-024).

has been removed from the fluid chambers

in the Spray Head Assembly.

reassembling.

MF-203