Addie Water Systems AU-1054-NSSXT Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Water System Addie Water Systems AU-1054-NSSXT. Addie Water Systems AU-1054-NSSXT 19 pages. Chemical free sulfur reduction

Print Page

SETTING THE CONTROL

The Oxidizer Plus uses the Fleck

model SXT power head to manage

the regeneration process.

While in the "Service" position the

display will alternate between time of day and days remaining till regeneration.

The clock uses a standard 12 hour display.

The regeneration cycle is preset to occur at 12:30A.M. every second day. This

timing and frequency of regeneration can be modified as required.

The duration of the regeneration cycle is approximately 60 minutes.

1. Oxygen refill, 60 minute duration. The unit empties of water and is

filled with air. During this cycle water will run to drain. There is a

slight delay at the start of the cycle while the pressure of the air

within the tank reaches atmospheric pressure. During this time no

air is drawn into the tank. Once the pressure has equalized, you

will hear as air is drawn into the unit.

2. Rapid Rinse, 1 minute duration. Air is purged from the distributor

tube.

3. The unit returns to the In-Service position. When this happens

water continues to enter the tank, compressing the air into a

bubble in the top portion of the tank. Air bubble volume will vary

slightly with the local conditions.

Untreated water is available during regeneration cycle.

Should you require the unit to regenerate at a time of day other than 12:30 A.M.

it is important that no other unit, softener or filter, regenerates at the same

time. This will interfere with the regeneration process of the Oxidizer Plus.