DANFI AUDIO TE-2030 Instruction Manual - Page 2
Browse online or download pdf Instruction Manual for Turntable DANFI AUDIO TE-2030. DANFI AUDIO TE-2030 10 pages. 3-speed vintage record player
Instructions Before Start
Read the manual before using this product. Keep these instructions for future reference.
1. About Records
1.
Never use a record with cracks or warps.
2.
Never use a record that is cracked or warped, as this may cause extreme wear and destruction of the needle.
3.
Never use unusual play methods such as scratching. This unit is not designed for such playback.
4.
Do not expose the unit to direct sunlight, high temperature or high humidity. This may cause warping or deformation. When holding the
record, hold only the label or the outer edge.
5.
Do not touch the record groove. Dust and fingerprints may cause distortion of the sound. Care of the record
6.
Use a special record cleaner and cleaner solution (sold separately). Wipe the record cleaner in a circular motion along the record groove.
2. About Bluetooth
1.
This unit has built-in Bluetooth receiver and will be automatically turned on when the turntable is on, to stop the Bluetooth,
disconnect from your devices or change to turntable function.
2.
Bluetooth used in this unit use the same frequency band (2.4GHz) as wireless LAN devices (IEEE802.11b/g/n), so if they are used near
each other, they may interfere with each other, resulting in reduced communication speed or connection failure. In this case, please
use it as far away as possible (about 10m).
3.
We do not guarantee the connection with all Bluetooth devices.
4.
Also, depending on the conditions, it may take some time to connect.
Introduction
Main features
• 3 speed turntable plays 33 1/3, 78, and 45 rpm records;
• Auto stop function
• Supports Bluetooth Input
• Aux In 3.5mm audio input
• 3.5mm headphone jack input
• Built-in stereo speakers
• Auto-stop functionality
• Bass and Treble
• RCA stereo audio outputs
Accessories Includes
45 rpm adapter
•
1x Stylus needle( installed)
•
AC/DC power adapter
•
User's quick guide
•
User's manual
•
Received a defective record player ?
Notice:
The gap between the case and the spinning
mechanism is for vibration-absorbing, it's a commonly
used design for starter turntable, which could be
considered being defective mistakenly.
Please use below contact Customer Service.
e-mail: [email protected]
2