Abtus AVS-1200C/V2 Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Controller Abtus AVS-1200C/V2. Abtus AVS-1200C/V2 8 pages. Multimedia controller

Print Page
User Operation Guide
PROGRAMMING MODE
1.5 “Relays Tab”
This allows configuration of “Relays” digital I/O for controlling of [projection screen in
conjunction with ABtUS screen controller AVS-SSR8V2.
1.6 “Timers/Misc”
This allows system time to be set manually or base on programming PC time in 12 or
24 hour format as well as “Auto Timer Off” with “Panel Lock” and “Reset” after time out.
PROGRAMMING MODE
“Clock setting”
Check on “Use PC Time” to set time in 12 or 24 hour format with reference to PC time or
manually.
“Auto Timer Off and Reset”
“Auto Time Off” function will set the control to shut down when time up.
Example: After 8pm, system will auto shut down that is “Turn off Projector, Turn off AV Switcher
and keep Projection Screen back home position” or depending on the “Macros” setup.
“Reset Timer” This allow “Reset” of “Panel Lock Function” when “Auto Timer Off” is set with
Panel Lock” enabled.
“Panel Lock”
This acts as a simple “Panel Lock” which disable all function and control on controller, prevent
miss handling or miss used of AV Projection System controlled.
Check “enable” to enable with a simple selection of either two or three buttons combination
as activation. After which, “Panel Lock” and then be “ON” and “Off” by press and hold the
selected two or three buttons combination at the same time for 3 to 5 min.