3RAY MT4034 User Manual

Browse online or download pdf User Manual for Digital Camera 3RAY MT4034. 3RAY MT4034 6 pages. Sport sunglasses with built-in video camera

Print Page

3RAY

Camera

button

ON/OFF

Introduction

MT4034 is a cutting-edge camera built-in a eye glass.

You can take pictures, save video fi les with sound, use it

as a webcam in Skype. Files are stored on microSD fl ash-

card, you can download them directly from fl ashcard or

through eye glass connected by USB cable.

Note! Before fi rst use fully charge the device.

Charging

Use included USB cable to plug it into USB port of PC com-

puter. During charging red ON/OFF LED is on, full charging

takes ca. 12 hours. When fully charged CAMERA LED will

be constantly fl ash blue.

Installing microSD card

Put microSD into card slot, note that fl ashcard connection

pins should facing outside of eyeglass.

Switching modes

Press once ON/OFF button, blue CAMERA LED indicator

will be on constantly. Device is now in snapshot mode.

When in snapshot mode every time you press shortly

CAMERA button a picture is taken, and CAMERA LED will

fl ash once to confi rm saving the fi le.

Next press and hold CAMERA button for about 2 sec, blue

CAMERA LED indicator will slowly blinking – video record-

ing is in progress. To stop recording press shortly CAMERA

button, blue CAMERA LED will blink fast 3 times, video fi le

will be saved. Device is now in snapshot mode again.

Next press and hold ON/OFF button for about 2 sec, blue

CAMERA LED indicator will go off . Device is now in off

mode.

Note! If no action is taken within 30 sec from switching

mode the device will automatically go to off mode.

Taking pictures

When device is in snapshot mode press shortly CAMERA

Sport Sunglasses with Built-In Video Camera

button. Every time you press it the device is saving a pic-

ture on microSD card.

Recording video

When you have switched from snapshot mode to video

MicroSD

mode the device will record video instantly. To stop record

press shortly CAMERA button. To start recording next

USB

video fi le press and hold again CAMERA button for 2 sec

– blue CAMERA LED indicator will be blinking slowly to

confi rm recording next fi le.

Connecting to PC computer

Data storage mode

When MT4034 is in off mode connect it to the PC compu-

ter using USB cable included in package. System will auto-

matically install the device as an USB mass storage device.

You can copy all fi les from device to windows desktop.

Webcam mode

Insert software disk into CD-ROM drive and run driver

installation. When fi nished plug MT4034 to PC using USB

cable and press ON/OFF button. Windows will install new

capture video device. In webcam mode only video is ena-

bled, microphone function is disabled – use external input

audio device for skype calls. Press again ON/OFF button to

exit to data storage mode.

Setting data and time

To set actual date and time you need to copy fi le "TAG.TXT"

to root folder of MT4034 in data storage mode. Copy "TAG.

TXT" from software disc to desktop and edit in windows

notepad. File contains lines as below:

[date]

2009/08/24

19:20:00

Modify appropriate lines to actual date and time, save it,

and then copy into root folder of MT4034 in data storage

mode.

Next unplug USB cable and wait until both LED indicator

goes off . Now turn on MT4034 – new time settings will be

applied.

Note! MicroSD card must be installed in MT4034.

Reset

If you encounter strange behavior of the device you can

put straighten paper clip into "reset hole" to restart the

device.

MT4034

User's manual