3rd Power DS $ '68 Plexi User Manual - Page 11

Browse online or download pdf User Manual for Amplifier 3rd Power DS $ '68 Plexi. 3rd Power DS $ '68 Plexi 17 pages. Dream solo series 112 combo amplifiers & heads

Print Page

Back Panel:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: SHOCK HAZARD – DO NOT OPEN. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK REPLACE FUSES WITH SAME
TYPE AND RATING. DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
A
B
AC Input (A)
The AC INPUT socket (TYPE IEC Grounded) is a required connection for oper-
ating your DREAM SOLO™ at 120V (standard USA household electrical power).
Fuses (B)
The MAINS FUSE requires a 2 AMP fast-acting fuse. This fuse protects your
amplifier from voltage peaks from your power outlet.
The H.T. FUSE requires a 0.5 AMP slow-blow fuse. The H.T. FUSE usually
blows if your power amp tubes are bad to protect the circuit from being damaged.

SAFETY NOTES:

• Always plug your amp into a properly grounded 3 prong AC outlet.
• Never plug your amp into an ungrounded outlet.
• Never remove or break off the 3rd prong safety ground pin from the
power cord.
• Never use a damaged or ungrounded power cord.
• Always use the proper value and type fuse according to the rear-panel
markings.
• Never attempt to replace the fuse while the amplifier is still plugged into
the power source. The fuse should only be replaced when the power cord
has been disconnected from its power source.
SPEAKER OUTPUTS
TYPE: 3AG 250V
SLO-BLO
A
16Ω
8Ω
NEVER OPERATE WITHOUT
CONNECT SPEAKERS TO ONE
/
TYPE: 3AG 250V
SPEAKERS CONNECTED.
OUTPUT ONLY - 16 , 8 or 4 .
SLO-BLO
0.25 A
C
HybridMASTER
™
4Ω
MIN
MAX
CAUTION: CHASSIS SURFACE HOT!
D
11
EFFECTS INSERT
RETURN
SEND
DREAM SOLO
™
E