Duluth Forge FVFLC30-2 Installation Instructions Manual - Page 4

Browse online or download pdf Installation Instructions Manual for Indoor Fireplace Duluth Forge FVFLC30-2. Duluth Forge FVFLC30-2 8 pages. Vent-free gas logs

Print Page

Separate the ember material into light pieces

smaller than the size of a dime. Place the

pieces around the round gas ports starting in

the front of the burner and working your way

toward the back of the burner. Do not place

ember material on the burner ports or the

carry over ports leading to the left and right

rear burner slots.

Burner

WARNING: Failure to position the parts in accordance with these

diagrams or failure to use only parts specifically approved with this

heater may result in property damage or personal injury.

CAUTION: After installation and periodically thereafter, check to

ensure that no yellow flame comes in contact with any log. With the

heater set to High, check to see if yellow flames contact any log. If

so, reposition logs according to the log installation instructions in

this manual. Yellow flames contacting logs will create soot.

It is very important to install the logs exactly as instructed. Do not modify logs. Use only logs

supplied with heater.

Each log is marked with a number. This number will help you to identify the logs when installing.

After installing logs, add decorative cinders on the ember ports, do not place any decorative

cinders on the main burner ports or on the logs (see illustration below).

Middle Log

Bracket

Grate Assembly

PLACING EMBER MATERIAL

Ember Material

INSTALLING LOGS

Ember Ports

www.factorybuysdirect.com

WARNING: Use only ember

material provided with log set.

Do not add additional ember

material.

Place ember material on front

burner port only. DO NOT PLACE

EMBER MATERIAL ON PORTING

BEYOND THE GRATE, OVER THE

MIDDLE OR BACK BURNERS.

Main Burner

Ports

Rear Log

Bracket

200274-01C