Danfoss VLT FC Series Installation Instructions Manual - Page 2
Browse online or download pdf Installation Instructions Manual for Controller Danfoss VLT FC Series. Danfoss VLT FC Series 6 pages. Igbt module replacement for d1h–d8h drives
Also for Danfoss VLT FC Series: Installation Manual (12 pages), Installation Manual (8 pages), Installation Instructions Manual (6 pages), Instructions Manual (11 pages), Installation Manual (6 pages)
Print Page
Installation Instructions
For B1 and B2 frame sizes, motor and relay connections are
located under the drive fuse block. To access these
connectors, loosen the three T-20 screws and move the fuse
block out of the way.
The fuse block does not need to be disassembled.
Illustration 1.3 Frame B1
1
Input power
2
Loosen screws
3
Drive fuses
4
Loosen screw
5
Motor (remove fuse plate to connect)
6
Relays
Table 1.3 Legend to Illustration 1.3
2
VLT® FC Series Internal Fuse Replacement
Illustration 1.4 Frame B2
1
2
3
4
5
6
Table 1.4 Legend to Illustration 1.4
®
MI92D102 - VLT
is a registered Danfoss trademark
Drive fuses
Loosen screws
Relays
Motor (remove fuse plate to connect)
Loosen screw
Input power