Dumor 1457225 Assembly Manual - Page 2

Browse online or download pdf Assembly Manual for Farm Equipment Dumor 1457225. Dumor 1457225 3 pages. 24" dumor rabbit cage starter kit

Print Page

Step 1. Rabbit Cage Set Up

1. Take the folded cage out of the carton and put it

on a flat surface. Remove the top panel and

make sure the door on the front panel is closed

to keep the cage secure during assembly.

2. Grab any two adjacent side panels and slide the

vertical panel into the side hooks until secure.

Step 2. Frame Legs Set Up

1. Lay the cage on its side and

attach the vertical frame legs

to the two horizontal plates on

each side of the cage. There

should be an extra hole at

the bottom of the vertical

frame leg that will be used

to attach the horizontal

dropping pan supports.

Secure with two nuts and

bolts per side. The head of

the bolt will be on the

outside of the cage.

2. Repeat Step 1 for the remaining vertical frame legs.

ASSEMBLY INSTRUCTIONS

3. Gently, flip the cage upside down and attach the horizontal

dropping pan supports on the inside of the vertical frame

legs. Bolt the supports through the vertical frame legs

from the same direction as the vertical frame legs.

4. Turn the cage upright and place the top panel on the cage

and secure the top panel with the hooks on all for sides.

Page 2

3. Repeat Step 2 for the remaining side panels.

You should now have all sides of the cage

assembled.