Danfoss iC7 Series Installation Manual - Page 5

Browse online or download pdf Installation Manual for DC Drives Danfoss iC7 Series. Danfoss iC7 Series 16 pages. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Also for Danfoss iC7 Series: Installation Manual (8 pages), Installation Manual (8 pages), Installation Manual (6 pages), Installation Manual (14 pages), Installation Manual (16 pages), Installation Manual (8 pages), Installation Manual (8 pages), Installation Manual (10 pages), Installation Manual (16 pages), Installation Manual (6 pages), Installation Manual (6 pages), Installation Manual (16 pages), Installation Manual (18 pages)

Print Page

In-back/Out-top Cooling Kit for FA09-FA10

Installation Guide

Mounting plate

Frequency converter

Bottom duct assembly

Rittal cabinet

2.3 Creating a Vent Opening in the Top Plate

To create a vent opening in the cabinet top plate, use the following steps. Use the dimensions in

plate, and

Illustration 4

for the FA10 top plate.

Procedure

Cut out the vent opening in the Rittal cabinet top plate using the dimensions in the template.

The opening must match the top duct opening.

Drill 6 screw holes (4 mm) around the vent opening using the dimensions in the template.

The holes must match the holes in the upper flange of the top duct.

6x Ø 4 (0.2)

Illustration 3: FA09 Rittal Cabinet Top Plate Template

223 (8.8)

191 (7.5)

80 (3.1)

Top duct assembly

Backplate

Mounting hole

Back vent

Illustration 3

95 (3.7)

3 (0.1)

14 (0.6)

AN371942666355en-000101 / 136R0250 | 5

Installation

for the FA09 top

95 (3.7)