Danfoss iC7 Series Installation Manual - Page 10

Browse online or download pdf Installation Manual for DC Drives Danfoss iC7 Series. Danfoss iC7 Series 18 pages. In-bottom/out-back cooling kit for fa09-fa10, frequency converters
Also for Danfoss iC7 Series: Installation Manual (8 pages), Installation Manual (8 pages), Installation Manual (6 pages), Installation Manual (14 pages), Installation Manual (16 pages), Installation Manual (8 pages), Installation Manual (8 pages), Installation Manual (10 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (6 pages), Installation Manual (6 pages), Installation Manual (16 pages)

Print Page
Danfoss iC7 Series Installation Manual
In-bottom/Out-back Cooling Kit for FA09-FA10
Installation Guide
1
2
3
4
Illustration 7: Installation of the Top Cover
1
M5x14 screws
2
Top cover
2.6 Creating a Vent Opening in the Base Plate
To create a vent opening in the base plate for the bottom duct, use the following steps. Use the dimensions in
frequency converters, and
Illustration 9
Procedure
1.
Cut out the vent opening in the cabinet base plate using the dimensions in the template.
2.
Drill 6 screw holes (4 mm) around the vent opening using the dimensions in the template.
The holes must match the holes in the lower flange of the bottom duct.
10 | Danfoss A/S © 2022.03
for FA10 frequency converters.
3
Top cover gasket
4
Top vent
AN371942757356en-000101 / 136R0252
Installation
Illustration 8
for FA09