Danfoss NEMA-3R Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for DC Drives Danfoss NEMA-3R. Danfoss NEMA-3R 8 pages. Cover kit for d1h–d2h vlt fc series fc 102, fc 103, fc 202, and fc 302

Print Page
Installation Instructions
1.4.2 Installing the Gland Plate
1.
Remove the existing gland plate and gasket from the
bottom of the frequency converter by removing 6
screws (T25) from the D1h or 8 screws (T25) from the
D2h. See Illustration 1.3.
2.
Make sure that the flange on the frequency converter
is smooth and clean in preparation for the new
gasket.
3.
Place the new gland plate over the opening, with the
gasket side facing the opening. See Illustration 1.4.
4.
Secure the new gland plate to the frequency
converter using the provided screws with captive
washers (6) for D1h or (8) for the D2h. Torque to 2.3
Nm (20 in/lbs).
1
Gasket
2
Screw with captive washer
3
Gland plate
Illustration 1.3 Removing Gland Plate
MI70I102
NEMA-3R Cover Kit for D1h–D2h
®
VLT
FC Series FC 102, FC 103, FC 202, and FC 302
1
2
3
Illustration 1.4 Installing NEMA 3R Gland Plate
Danfoss A/S © 06/2015 All rights reserved.
Gasket
Screw with captive washer
Gland plate
3