CashConcepts CCE 4000 User Manual - Page 2

Browse online or download pdf User Manual for Banknote Counter CashConcepts CCE 4000. CashConcepts CCE 4000 11 pages.
Also for CashConcepts CCE 4000: Short Manual (2 pages)

Print Page

CashConcepts Europe GmbH

Kemptener Straße 99 – D-88131 Lindau / Germany

Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20

Email: [email protected] / Web: www.cce.tm

Introduction

Thank you for choosing the CCE 4000. This coin counting and coin sorting machine is designed to simplify the daily cash or vending

machine billing. Through the sorting function the coins can be inserted mixed and you will then get the result per coin type and,

of course, the total sum. Batch counting allows you to count for refill cash drawers and vending machines.

If you have any questions about the CCE 4000 coin counting machine, please do not hesitate to contact us.

Your CashConcepts Team

Warning

General



Please pay attention that no foreign objects (e.g., paper clips, paper of coin tubes) fall in the machine, these can block

the engines and the sensitive sensors of the machine and damage or destroy them.



Please note that during the countable process no ties, hair or clothes are drawn in to avoid injuries and damages to the

machine.



Please do not grab into the hopper while the counting process is running. Always stop the machine to prevent injuries.



Please pay attention that no strongly dirty or damaged coins is counted in the machine, these can hook up in the machine

and tear.



If the unit produces unusual noise or if the transport wheel does not turn despite the machine is being activated, please

switch off the unit and check whether foreign objects are inside the unit.

Electricity supply



Use the device only with the provided net part.



Use no damaged or humid net parts or power supply lines.



Connect the stream supply not with humid hands.



During the change of the fuse the machine must be completely separated from the stream net to avoid an electric

blow.

Servicing



Always switch the power off during cleaning.



Clean the machine with a dry cloth.



Do not use wet or damp cloth or cleaning products.



Do not spill any liquid or spray chemicals over the equipment.



If any liquid is spilled on it, disconnect the power cable from the supply and contact your dealer.