Danfoss VLT AutomationDrive FC 302 Installation Manual - Page 4

Browse online or download pdf Installation Manual for DC Drives Danfoss VLT AutomationDrive FC 302. Danfoss VLT AutomationDrive FC 302 16 pages. Igbt module replacement for d1h–d8h drives
Also for Danfoss VLT AutomationDrive FC 302: Operating Manual (16 pages), Installation Manual (20 pages), Installation Instructions (4 pages), Installation Instructions Manual (6 pages), Installation Instructions Manual (12 pages), Installation Manual (18 pages), Installation Instructions Manual (8 pages), Installation Instructions Manual (10 pages), Installation Manual (6 pages), Installation Manual (16 pages), Operating Instructions Manual (16 pages), Installation Instructions Manual (6 pages), Installation Manual (8 pages), Installation Instructions Manual (6 pages), Installation Manual (6 pages)

Print Page
Danfoss VLT AutomationDrive FC 302 Installation Manual
Installation Guide | VLT® Programmable I/O MCB 115

1 Introduction

1.1 Purpose of this Installation Guide

This manual provides information for safe installation of a VLT
The installation guide is intended for use by qualified personnel only. Personnel must be familiar with the VLT
Read and follow the instructions before installation, and ensure that instructions for safe installation are observed. Always keep these
instructions available with the drive.

1.2 Trademarks

®
VLT
is a registered trademark for Danfoss A/S.

1.3 Document Version

This manual is regularly reviewed and updated. All suggestions for improvement are welcome. See document version and changes
applied in
table
1.
The original language of this manual is English.
Table 1: Version and Changes Applied
Revision date
Remarks
2019.10
Option now also applicable for VLT® HVAC Drive FC 102 and VLT® Refrigeration Drive FC 103.

1.4 Additional Resources

More information resources are available to understand advanced drive functions and programming.
•
The VLT® FC Series Operating Guides provide information required to install and commission the drive for given applications.
•
The VLT® FC Series Programming Guides provide greater detail on working with parameters.
•
VLT® FC Series Design Guides provide detailed capabilities and functionality to design motor control systems for various
applications.
Technical documentation for other product options is available at www.danfoss.com.

1.5 Product Overview

1.5.1 Intended Use

®
The VLT
Programmable I/O MCB 115 is intended to:
4 | Danfoss A/S © 2020.01
®
Programmable I/O MCB 115 option used in the VLT
Introduction
®
FC drive series.
®
FC drive series.
AN295938195323en-000101 / 130R0655