Danfoss VLT HVAC Drive FC 102 Installation Manual - Page 4

Browse online or download pdf Installation Manual for DC Drives Danfoss VLT HVAC Drive FC 102. Danfoss VLT HVAC Drive FC 102 6 pages. Igbt module replacement for d1h–d8h drives
Also for Danfoss VLT HVAC Drive FC 102: Operating Manual (16 pages), Installation Manual (20 pages), Installation Instructions Manual (6 pages), Installation Instructions Manual (12 pages), Installation Manual (18 pages), Installation Instructions Manual (11 pages), Installation Instructions Manual (8 pages), Installation Instructions Manual (10 pages), Operating Instructions Manual (16 pages), Installation Instructions Manual (6 pages), Installation Manual (16 pages), Installation Manual (8 pages), Instruction Manual (16 pages), Installation Instructions Manual (6 pages), Installation Manual (6 pages)

Print Page

Installation Guide | VLT® 24 V DC Supply MCB 107

Procedure

1. Disconnect power to the drive.

2. Disconnect power to the live part connections on the relay terminals.

3. Remove the LCP or the blind cover.

4. Remove the terminal cover.

5. Remove the control cables.

6. Remove the cable decoupling plate.

For enclosure sizes A2 and A3, also remove the plastic cover underneath the decoupling plate (if installed).

7. Insert the option in the D-option slot.

8. Mount the cable decoupling plate.

9. Connect the control cables and relieve the cables with the enclosed cable strips.

10. Attach the terminal cover and the LCP, or the blind cover.

11. Connect power to the drive.

Example:

1 LCP

3 Cable decoupling plate

5 D-option slot

Illustration 2:

Installing a D-Option in an A2/A3 Enclosure

Scope of Delivery, Safety, and Installation

2 Terminal cover

4 D-option

AN287957936346en-000101 / 130R0308