Casio 2191 General Manual

Browse online or download pdf General Manual for Watch Casio 2191. Casio 2191 2 pages. Casio watch operation guide

Print Page

Module No. 2090/2190/2191

Press C C C C C to change from mode to mode.

In any mode (except when making any settings), press D D D D D to illuminate the display for just over a second.

Timekeeping Mode

TIMEKEEPING MODE

Month - Day

PM indicator

Hour : Minutes

Seconds

Day of week

Press B B B B B to switch the display between Time/Date/Day of week and Time/Anima-

tion.

Animated figure types depend on the watch model.

To make the time, date, and other settings

1. While in the Timekeeping Mode, hold down A A A A A until the seconds digits flash on the

display.

2. Press C C C C C to change the selection (flashing) in the following sequence.

Second

DST

Day

Month

3. While the seconds setting is selected (flashing), press B B B B B to reset it to 00. If you

press B B B B B while the seconds setting is in the range of 30 to 59, the seconds are reset

to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to

29, the minutes count is unchanged.

While the DST setting is selected, press B B B B B to toggle it on and off.

While the 12/24-hour format setting is selected, press B B B B B to toggle it between 12

and 24.

While any other setting (besides seconds) is selected (flashing), press B B B B B to in-

crease it or D D D D D to decrease it.

Holding down either button changes the setting at high speed.

4. After you set the time and date, press A A A A A to return to the Timekeeping Mode.

The day of the week is automatically set in accordance with the date.

The date can be set within the range of January 1, 1995 to December 31, 2039.

If you do not press any button for a few minutes while a setting is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

The current time for all other World Time cities are adjusted in accordance with the

Timekeeping Mode settings you make.

ABOUT THE BACKLIGHT

In any mode (except when making any settings), press D D D D D to illuminate the display

for just over a second.

The backlight of this watch employs an electro-luminescent (EL) light, which loses

its illuminating power after very long term use.

Frequent use of the backlight shortens the battery life.

The watch emits an audible sound whenever the display is illuminated. This does

not indicate malfunction of the watch.

The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

WORLD TIME MODE

The World Time Mode shows the current time in any one of 27 different cities. See

the "TIME ZONE CHART" at the back of this manual for information about city codes,

time zones, etc.

Mode indicator

Press B B B B B .

World Time Mode

Hour : Minutes

PM indicator

Press B B B B B .

Animated display

City Code

Hour

Minutes

Year

12/24-Hour Format

Press A A A A A .

GENERAL GUIDE

Data Bank Mode

1. Press B B B B B to scroll through the city codes. Holding down B B B B B scrolls at high speed.

The center of the screen shows the currently selected city code.

2. Press A A A A A to display the current month, day, and time for the city whose city code is

on the display.

Pressing A A A A A causes the bottom of the screen to toggle between the city code and

GMT differential.

Holding down A A A A A toggles summer time (Daylight Saving Time) for the displayed city

on and off.

3. To change to another city, press B B B B B to return to the city code select screen. Then

you can repeat the steps of this procedure from step 1.

The Data Bank Mode lets you store up to 30 name and telephone number records.

You can recall data by scrolling it on the display.

Mode indicator

The first screen that appears when you enter the Data Bank Mode shows how

many records are free (available for data input).

The name area can hold up to eight characters, while the number area can hold up

to 14 digits.

The record on the display when you exit the Data Bank Mode appears first the next

time you enter the Data Bank Mode.

To input new Data Bank data

1. In the Data Bank Mode, press B B B B B until the blank display appears. (The center of the

screen shows blank.)

If there is no Data Bank data stored in memory yet, the blank display appears as

soon as you enter the Data Bank Mode.

The blank display does not appear if there are already 30 Data Bank Mode records

stored in memory.

2. Hold down A A A A A and a cursor appears.

3. Use B B B B B or D D D D D to input a character at the cursor position. The character changes in

the following sequence. Holding down either button changes the character at high

speed.

(space)

4. After you select the character you want, press C C C C C to advance the cursor to the right.

Repeat 3 and 4 until you complete name input.

You can input up to 8 characters in the name area.

5. After the name input is through, use C C C C C to move the cursor to the telephone number

area.

6. While the cursor is in the telephone number area, use B B B B B or D D D D D to input a number

you want. The character changes in the following sequence. Holding down either

button changes the character at high speed.

7. After you select the character you want, press C C C C C to advance the cursor to the right.

Repeat 6 and 7 until you complete telephone number input.

8. After inputting your data, press A A A A A to store it.

When you press A A A A A to store data, the message "SORT" appears on the display for

a few seconds. After the sort operation is complete, the cursor appears in the name

area, ready for input next record. Input next record or press A A A A A to exit the new data

input procedure.

If you do not operate any button for a few minutes while a setting is flashing, the

message "SORT" appears on the display for a few seconds. After the sort opera-

tion is complete, the name search screen appears.

The name area of the display can show only three characters at a time, so longer

name scrolls continuously from right to left.

2090/2190/2191-1

Stopwatch Mode

DATA BANK MODE

Remaining memories

Press B B B B B .

Press A A A A A .

Press D D D D D .

Press B B B B B .

A ~ Z

0 ~ 9

Press D D D D D .

Press B B B B B .

0 ~ 9

(space)