Danfoss BasicPlus2 WT-T Installation Manual - Page 3

Browse online or download pdf Installation Manual for Thermostat Danfoss BasicPlus2 WT-T. Danfoss BasicPlus2 WT-T 8 pages.

Print Page

Installation Guide

3. Notes

1. Correct wiring is essential; using instrument to con-

firm L and N before wiring is recommended.

2. Don't remove too much of the insulation cover from

the wire to avoid short circuit caused by the naked

wire touching the metal 86 size mounting wall box.

3. Don't let the screw press or touch the wire when

using screws to fix room thermostat in wall box. A

short-circuit risk exists if the wire insulation cover is

damaged by the screw, and if the naked wire con-

nects with the screw.

4. If walls must be painted, mount the room thermo-

stat after painting, to avoid dust or paint material

penetrating the room thermostat and thus damag-

ing the PCB.

5. The max. load of relay is 3 A (resistive) or 1 A (induc-

tive, such as pump or motor). The relay will be dam-

aged if the load exceeds the limit.

6. Don't cover the thermostat, for instance by hanging

towels directly in front of it.

7. The room thermostat should be connected to the

corresponding loop actuator in individual room

temperature control.

Danfoss Heating Solutions

BasicPlus

WT-T Room Thermostat

VICUL202