Danfoss DEVIreg 132 Installation Manual - Page 10
Browse online or download pdf Installation Manual for Thermostat Danfoss DEVIreg 132. Danfoss DEVIreg 132 16 pages.
Print Page
4.
Set the maximum floor temperature between 20 °C
and 50 °C by using a thin screwdriver on the black
electronic component with temperature indications in
the upper right corner.
5.
Install the front cover and button in the reverse order
of disassembly.
6.
Turn on the power supply.
3
Settings
How to change the minimum and maximum floor
temperatures
1.
Lift off the adjustment
button using a thin
screwdriver.
2.
Move the pins to the de-
sired positions.
(
and
3.
Put the adjustment button
back in place.
Please be aware of the following:
•
The floor temperature is measured where the sensor
is placed.
•
The temperature of the bottom of a wooden floor can
be up to 10 degrees higher than the top.
10
)
DEVIreg™ 132
Installation Guide