Danfoss ECL Comfort 210 Operating Manual - Page 3

Browse online or download pdf Operating Manual for Thermostat Danfoss ECL Comfort 210. Danfoss ECL Comfort 210 10 pages. Extended heat cut-out
Also for Danfoss ECL Comfort 210: User Manual (12 pages), User Manual (12 pages), User Manual (6 pages), Installation Manual (4 pages), Installation Manual (20 pages), Operating Manual (16 pages), Installation Manual (7 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (20 pages), Installation Manual (16 pages), Mounting Manual (16 pages)

Print Page

ECL Comfort 210, 296 and 310, return temperature limitation

VI.GU.W2.02

Automatic update of controller software (firmware):

The software of the controller is updated automatically when the key

is inserted (as of controller version 1.11 (ECL 210 / 310) and version

1.58 (ECL 296)). The following animation will be shown when the

software is being updated:

Progress bar

During update:

•

Do not remove the KEY

If the key is removed before the hour-glass is shown, you have

to start afresh.

•

Do not disconnect the power

If the power is interrupted when the hour-glass is shown, the

controller will not work.

As this Operating Guide covers several system types, special system

settings will be marked with a system type. All system types are shown

in the chapter: 'Identifying your system type' .

°C (degrees Celsius) is a measured temperature value whereas K

(Kelvin) often is used for temperature differences.

The ID no. is unique for the selected parameter.

Example

First digit

11174

12174

If an ID description is mentioned more than once, it means that there

are special settings for one or more system types. It will be marked

with the system type in question (e.g. 12174 - A266.9).

Parameters indicated with an ID no. like "1x607" mean a universal

parameter.

x stands for circuit / parameter group.

Second digit

Last three digits

174

Circuit 1

Parameter no.

174

Circuit 2

Parameter no.