Casio 2746 User Manual

Browse online or download pdf User Manual for Watch Casio 2746. Casio 2746 1 pages.

Print Page

USER'S GUIDE 2744/2745/2746

[Module 2746]

To Set Time

1) Pull the crown out when the second hand is at

12 o'clock position and the second hand stops.

2) Set the hands by turning the crown.

3) In accordance with a time signal, push the crown in.

[Modules 2744, 2745]

To Set Time

1) Pull the crown out to the second click when the

second hand is at 12 o'clock position and the second

hand stops.

2) Set the hands by turning the crown.

3) In accordance with a time signal, push the crown in.

To Set Date

1) Pull the crown out to the first click.

2) Set the date by turning the crown.

3) Push the crown in to the normal position.

■ Avoid setting the day-date between 8:00 p.m. and 1:00 a.m.

(the day-date display may not change in the following day).

■ Second hand moves in 2-second increments when power is low.

■ For watch with the elapsed time bezel

Rotate the elapsed time bezel to align the

hand.

After certain amount of time elapsed, read the graduation on the

elapsed time bezel which the minute hand points to.

The elapsed time is indicated.

Some water resistant models are equipped with a screw lock

•

crown.

•

With such models, you must unscrew the crown in the direction

noted in the illustration to loosen it before you can pull it out. Do

not pull too forcibly on such crowns.

•

Also note that such watches are not water resistant while their

crowns are loosened. Be sure to screw the crowns back in as

far as they will go after making any setting.

Crown

(Normal position)

First click

(Setting

date)

Second click

(Setting time)

The configuration of your

watch may differ

somewhat from that shown

in the illustration.

mark with the minute

Elapsed time bezel