3T-Components 3T-MOTORS 3T45-20 Installation & Operating Instructions Manual - Page 15

Browse online or download pdf Installation & Operating Instructions Manual for Engine 3T-Components 3T-MOTORS 3T45-20. 3T-Components 3T-MOTORS 3T45-20 20 pages. Shutter / awning motors with mechanical limit switches, for shafts from 60/40 mm

3T-Components 3T-MOTORS 3T45-20 Installation & Operating Instructions Manual
INSTALLATION INSTRUCTIONS
Slide the side bearing with universal bearing onto the support tube & fasten.
Ensure that the motor square spigot is properly engaged in the universal bearing.
Secure the motor square spigot with the supplied cotter pin.
Attach the cover to the side bearing.
Install awning & release fuses.
3.9
Support tube
Side bearing &
Universal bearing

Awning motor wiring:

4
Connect the awning motor and switch (or timer) to the mains.
The electrical connection of the awning motor and control may only be carried out by qualified personnel.
If the drive should run in the opposite direction after installation, the motor's upstream and downstream leads (brown + black) must be turned.
Power grid
230 V / 50 Hz
1) brown / black = L1 / Phase
2) blue = N Neutral conductor
3) green/yellow = PE Protective conductor
>
fig. 3.11
>
fig. 3.12
3.10
1 (L1)
2 (N)
3 (PE)
>
fig. 3.9
>
fig. 3.10
3.11
Cotter pin
3.12
Cover
Awning motor
230 V / 50 Hz
1 (Up/Down)
2 (Up/Down)
3 (N)
4 (PE)
1) black = Departure or ascent
2) brown = Departure or ascent
3) blue = N Neutral conductor
4) green/yellow = PE Protective conductor
3T-MOTORS Tubular motors | Installation instructions
Side bearing
15