Danfoss ECtemp 330 Installation Manual - Page 5
Browse online or download pdf Installation Manual for Thermostat Danfoss ECtemp 330. Danfoss ECtemp 330 16 pages. Electronic thermostat
Also for Danfoss ECtemp 330: Installation Manual (12 pages), Installation Manual (12 pages), Installation Manual (12 pages)
Print Page
ECtemp 330 (+5 to +45°C)
Protection class
Dimensions
Weight
The product complies with the EN/IEC Standard "Automatic
electrical controls for household and similar use":
•
EN/IEC 60730-1 (general)
•
EN/IEC 60730-2-9 (thermostat)
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
IMPORTANT: When the thermostat is used to control a
floor heating element in connection with a wooden floor or
similar material, always use a floor sensor and never set the
maximum floor temperature to more than 35°C.
Please also note the following:
•
The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
•
The thermostat must be connected to a power supply
via an all-pole disconnection switch.
•
The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
Installation Guide
Class II -
86 x 36 x 58mm
83g
5