Danfoss EFET 160 Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Thermostat Danfoss EFET 160. Danfoss EFET 160 12 pages.

Print Page

Installation

1 . Before opening the thermostat housing set adjustment button to

minimum temperature, viz . -10˚C .

2 . When installing in bathrooms etc ., the minimum distance to water

installations must be observed and must comply with current regula-

tions for electric installations .

3 . The stamped punchings for diaphragm nipple are removed with a

screwdriver and a hammer .

4 . The thermostat is mounted vertically on a wall . The screw holes must

be sealed with the enclosed plugs .

5 . If the sensor is to be built in or exposed to pressure it should be

placed in an installation pipe .

6 . Installation of thermostat see diagram . Choose function (heating/

cooling) .

7 . After closing the thermostat housing, check that adjustment button

can be adjusted within full temperature range, i .e . from -10˚C to

+50˚C .

02/2007

VIFZK102