Danfoss KP 79 Installation Manual - Page 3

Browse online or download pdf Installation Manual for Thermostat Danfoss KP 79. Danfoss KP 79 4 pages. Vapour charge, adsorption charge (cross ambient)
Also for Danfoss KP 79: Installation Manual (2 pages), Instructions (4 pages)

Print Page

Adjustment spindles location

Note

Remove lockplate before thermostat

adjustment. Replace lockplate after

adjustment (if desired).

RANGE

See printed instruction on top of control

increase temp. (warmer): turn CW

decrease temp. (colder): turn CCW

(use adjustment knob)

Determination of differential

For KP w/ vapor charge and auto. reset (KP 61, KP 62, KP 63, KP 68, KP 69): Use graphs to determine correct differential.

Example:

HSP = 5.6 °C (45 °F) =>

LSP = 0 °C (32 °F)

DIFF (from graph):

7.2 °C (13 °F) (value which has to be

set on diff. scale).

DKRCC.PI.CA0.C1.22 / 520H8304

DIFFERENTIAL

See printed instruction on top of control

(use adjustment knob or screwdriver)

For KP w/ adsorption charge (KP 71, KP 73, KP 75, KP 77, KP 79, KP 81):

The differential will be HSP less LSP

Example:

HSP – LSP = DIFF.

7 °C – 5 °C = 2 °C

(45 °F)(35 °F) (10 °F)

Note:

(Load Option A)

(Load Option B)

CUT-IN

= HSP or

CUT-IN

CUT-OUT = LSP

CUT-OUT = HSP

See "Wiring"

Increase: turn CW

decrease: turn CCW

= LSP