Danfoss RT52-RF Installation Instructions Manual - Page 8
Browse online or download pdf Installation Instructions Manual for Thermostat Danfoss RT52-RF. Danfoss RT52-RF 11 pages.
Also for Danfoss RT52-RF: Installation Instructions (4 pages)
Print Page
All models
GB
Before you start
To reset the unit, open the flap on the
front of the programmer. Remove the
batteries for minutes, then replace.
The display will automatically default to
DAY mode (d shown top left of display)
and show actual temperature in the large
20.0
C
characters and required temperature in
22
the smaller characters.
Setting the DAY & NIGHT temperatures
DAY temperature
Use the s and t buttons until the
required DAY temperature is shown.
NIGHT (set-back) temperature
Press s and t buttons together once to
select NIGHT mode (n shown top left of
display).
Use the s and t buttons until the
required NIGHT (set-back) temperature
20.0
C
is shown (between 5-30°C or Off ).
22
10