Danfoss TP5000 RF Si Installation Instructions Manual - Page 3
Browse online or download pdf Installation Instructions Manual for Thermostat Danfoss TP5000 RF Si. Danfoss TP5000 RF Si 14 pages. 5/2 day programmable electronic room thermostat
Also for Danfoss TP5000 RF Si: Installation And User Instructions Manual (14 pages), User Instructions (2 pages)
Print Page
- 1. Installation Instructions
- 2. Product Specification
- 3. Installation
- 4. Commissioning (RF Models Only)
- 5. Your Programmable Room Thermostat
- 6. Preset Programmes
- 7. User Instructions
- 8. Before You Start
- 9. Setting the Clock & Day
- 10. Running Your Programme
- 11. Before You Change the Preset Programmes
- 12. Changing the Preset Programmes
- 13. User Overrides
- 14. Frost Protection
- 15. Battery Replacement
Installation Instructions
Please Note:
This product should only be installed by a qualifi ed
electrician or competent heating installer and should be
in accordance with the current edition of the IEEE wiring
regulations.
Product Specifi cation
Thermostat features
Power supply
Memory back-up
Switching action of output relay
Switch rating of relay contact
Transmission frequency (RF model)
Transmitter range (RF model)
Temperature range
Dimensions, mm
Design standard
Rated impulse voltage
Ball hardness test
Control pollution situation
Temperature accuracy
Time accuracy
Important note RF products: Ensure that there are no large metal objects, such as boiler cases
or other large appliances, in line of sight between the transmitter and receiver as these will
prevent communication between thermostat and receiver.
TP5000
2 x AA/MN1500/LR alkaline cells
1 min for battery change
1 x SPDT, Type 1B
3(1)A, 10-230Vac
N/A
N/A
5-30°C
110 wide, 88 high, 28 deep
EN60730-2-9 (EN300220 for RF)
2.5Kv
75°C
Degree 2
±1°C
±1 min.
GB
TP5000-RF
N/A
N/A
433.92MHz
30m max
3