Danfoss ECL Comfort 310 Installation Manual - Page 4

Browse online or download pdf Installation Manual for Control Unit Danfoss ECL Comfort 310. Danfoss ECL Comfort 310 8 pages. A302
Also for Danfoss ECL Comfort 310: Mounting Manual (4 pages), User Manual (12 pages), User Manual (12 pages), Installation Manual (4 pages), Installation Manual (16 pages), Installation Manual (20 pages), Service Manual (16 pages), Operating Manual (8 pages), Operating Manual (16 pages), Operating Manual (10 pages), Installation Manual (20 pages), Installation Manual (7 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (20 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (20 pages), Installation Manual (12 pages), Mounting Manual (20 pages), Mounting Manual (20 pages), Mounting Manual (12 pages), Mounting Manual (16 pages), Operating Manual (8 pages)

Print Page

Installation Guide

3.5 Select wireless network to be used for wireless bridge

The Netgear wizard asks for wireless network to be used by the wire-

less bridge. Select the wireless network.

The Netgear wizard now asks for the password to the selected wire-

less network. Enter the password.

The wireless bridge is then completing the configuration and the

ethernet connection on the side of the wireless bridge can now be

connected to the ECL Comfort 310.

The ECL Comfort 310 controller must be configured to connect to

the local network (LAN).

If the ECL Portal is used as SCADA system then the ECL Com-

fort 310 must be configured for DHCP instead of STATIC in the

System>Ethernet menu and the ECL Portal feature must be ena-

bled in the System>Portal Config menu.

DEN-SMT/DK

ECL 310 Comfort to WLAN

VI.HX.D1.02

Enter passphrase for the selected wireless network.

If used with ECL Portal: Configure for DHCP.

Enable the ECL Portal in the Portal Config menu.

Danfoss District Energy