Dungs MPA 4112 V2.0 User Manual - Page 5

Browse online or download pdf User Manual for Burner Dungs MPA 4112 V2.0. Dungs MPA 4112 V2.0 16 pages. Automatic burner control system
Also for Dungs MPA 4112 V2.0: User Manual (16 pages)

Print Page

3. Target group

The target group of this manual is spe-

cialised gas safety and control technol-

ogy personnel, qualified persons or the

persons instructed by them. They are

capable of assessing the work assigned

to them as well as potential hazards on the

basis of their technical training, knowledge

and experience, as well as knowledge of

the relevant regulations. Only they are per-

mitted to install, start up, adjust and service

the equipment under compliance with the

accepted rules of industrial safety.

Place this user manual in an easily

viewable location in the installation

room. Perform work only after reading

the safety instructions in this user man-

ual.

5 ... 16

4. Warnings

4.1 General warnings

The accepted rules of industri-

al safety and the accident pre-

vention regulations must be

followed, if necessary taking

safety measures to ensure the

protection of persons.

Carry out all settings and set-

ting values only in accordance

with the user manual of the

connected machine.

Never perform work when gas

pressure or voltage is pres-

ent. Avoid open fire. Comply

with government regulations.

The device must be examined

for transport damage prior to

installation.

The device must not be ex-

posed to an open flame. Pro-

tection against lightning must

be provided.

The device may be operated

only in accordance with the

operating conditions speci-

fied on the rating plate.

Protection must be ensured

against environmental and

climatic influences (corro-

sion, snow, icing, moisture

(e.g. due to condensation),

mould, UV radiation, harmful

insects and toxic, corrosive

solutions / liquids (e.g. cut-

ting / cooling fluids)). Subject

to the installation site, safe-

ty measures must be taken

when necessary.

The device must be protected

against vibrations and me-

chanical impacts.

The device must be secured

in areas with heightened risk

of earthquakes in accordance

with local regulations.

Radiation heat is a source

of heat that can result in an

ambient temperature above

the permitted temperature.

Provide proper shielding to

protect against radiant heat.

Liability for safety-relevant

systems, devices or compo-

nents.

No liability on the part of

DUNGS applies in the cases

of safety-related components,

equipment and systems. Both

the product liability for conse-

quential damages of any kind

and the liability for material

defects if these safety-relat-

ed components, equipment

and systems are overridden,

modified or repaired by un-

authorised technical staff or

when using replacement parts

not specifically permitted for

the application.

Attached accessories must

be suitable and approved for

the medium.

After work has been complet-

Safety

ed, carry out a function test.

first

O.K.