Danfoss VLT AQUA Drive FC 202 Installation Manual - Page 8

Browse online or download pdf Installation Manual for Control Unit Danfoss VLT AQUA Drive FC 202. Danfoss VLT AQUA Drive FC 202 8 pages. Igbt module replacement for d1h–d8h drives
Also for Danfoss VLT AQUA Drive FC 202: Operating Manual (16 pages), Installation Manual (20 pages), Installation Instructions Manual (6 pages), Installation Manual (18 pages), Installation Instructions Manual (8 pages), Installation Instructions Manual (10 pages), Installation Manual (6 pages), Operating Instructions Manual (16 pages), Installation Instructions Manual (6 pages), Installation Instructions Manual (6 pages), Installation Manual (8 pages), Installation Manual (6 pages)

Print Page
Danfoss VLT AQUA Drive FC 202 Installation Manual
Installation Guide | VLT® Wireless Communication Panel LCP 103

2.5 Specifications

Standards
Frequency range
Antenna
Security
Operating temperature
Operating humidity
Operating mode
Ingress protection
Electrical rating
Internal memory size
Dimensions (LxWxD) [mm (in)]
Weight [g (oz)]
Firmware update
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective
companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
Danfoss A/S © 2020.02
IEEE 802.11 b/g
2.4~2.4835 GHz
PCB-mounted chip antenna
WPA2
-25 °C to +50 °C (-13 °F to +122 °F)
5–95% RH, non-condensing
Access point
IP20 (IP55 with gasket)
5 V, 250 mA
14 MB
131.2x66.6x23 (5.1x2.6x0.9)
85.3 (2.88)
VLT® Motion Control Tool MCT 10 software version 4.10 or higher.
*M0022401*
M0022401
Installation
AN331428064824en-000101/ 130R0814