Danfoss VLT AutomationDrive FC 302 Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Control Unit Danfoss VLT AutomationDrive FC 302. Danfoss VLT AutomationDrive FC 302 6 pages. Igbt module replacement for d1h–d8h drives
Also for Danfoss VLT AutomationDrive FC 302: Operating Manual (16 pages), Installation Manual (20 pages), Installation Instructions (4 pages), Installation Instructions Manual (6 pages), Installation Instructions Manual (12 pages), Installation Manual (18 pages), Installation Instructions Manual (8 pages), Installation Instructions Manual (10 pages), Installation Manual (6 pages), Installation Manual (16 pages), Operating Instructions Manual (16 pages), Installation Instructions Manual (6 pages), Installation Manual (16 pages), Installation Manual (8 pages), Installation Manual (6 pages)

Print Page
Danfoss VLT AutomationDrive FC 302 Installation Instructions Manual
Installation Instructions

Specifications

Standards
Frequency range
Antenna
Security
Operating temperature
Operating humidity
Operating mode
Ingress protection
Electrical rating
Internal memory size
Dimensions (LxWxD) [mm (in)]
Weight [g (oz)]
Firmware update
MI38V402
®
VLT
Wireless Communication Panel LCP 103
®
VLT
FC Series FC 102, FC 103, FC 202,
FC 301/FC 302, and LD 302
IEEE 802.11 b/g
2.4~2.4835 Ghz
PCB-mounted chip antenna
WPA2
-25 °C to +50 °C (-13 °F to
+122 °F)
5–95% RH, non-condensing
Access point
IP20 (IP55 with gasket)
5 V, 250 mA
14 MB
131.2 x 66.6 x 23 (5.1 x 2.6 x 0.9)
85.3 (2.88)
MCT 10 Set-up Software version
4.10 or higher
Danfoss A/S © 08/2018 All rights reserved.
3