Danfoss VLT AutomationDrive FC 360 Installation Instructions - Page 2
Browse online or download pdf Installation Instructions for Control Unit Danfoss VLT AutomationDrive FC 360. Danfoss VLT AutomationDrive FC 360 4 pages. 90–315 kw, enclosure sizes j8–j9
Also for Danfoss VLT AutomationDrive FC 360: Installation Instructions (4 pages), Installation Instructions (2 pages), Operating Manual (2 pages)
Print Page
Installation Instructions
2.
Unplug the fan cable
Illustration 1.2 Fan Cable Plug. Plug Location Depends on Fan
Type
Enclosure type J3
1.
Remove the M3x6 screw in the bottom right corner.
Illustration 1.3 Removing Fan Screw on Enclosure Type J3
2
Fan Replacement
2.
Illustration 1.4 Pulling out Fan on Enclosure Type J3
3.
Illustration 1.5 Fan Cable Plug. Plug Location Depends on Fan
Type
®
MI06F102 - VLT
is a registered Danfoss trademark
Press the levers on each side of the fan and pull the
fan outwards.
Unplug the fan cable