Danfoss APP 11-13 Disassembling And Assembling Instructions - Page 9

Browse online or download pdf Disassembling And Assembling Instructions for Water Pump Danfoss APP 11-13. Danfoss APP 11-13 18 pages. Changing pistons
Also for Danfoss APP 11-13: Instruction Manual (8 pages)

Print Page

Instruction

Disassembling and assembling APP 11-13 and APP 16-22

13.

Make sure there is enough free space for

shaft beneath the housing. Minimum 100

mm (3,94 inch). Carefully lower cylinder

barrel into housing.

WARNING:

If cylinder barrel is dropped or lowered

too fast into housing, the shaft bearing

might be damaged.

Replacement of the shaft bearing can then

only be done at Danfoss DK- Nordborg.

15.

Place the 7 springs and 3 pins in cylinder

barrel. The pin holes are assymetric.

17.

Place retainer plate in cylinder barrel.

(Remember to lubricate the retainer plate

and cylinder bushings with clean filtered

water).

180R9228 / 521B1181 / DKCFN.PI.013.A2.02 / 10.2013

14.

Unscrew M8 eye bolt.

16.

Place the spring guide and the retainer

guide on the cylinder shaft.

18.

Ensure that retainer plate is oriented

correctly, with its slant surfaces pointing

downwards.