Danfoss PAH Series Service Manual - Page 13

Browse online or download pdf Service Manual for Water Pump Danfoss PAH Series. Danfoss PAH Series 20 pages. Pah 2-6.3/paht 2-6.3/paht c 2-6.3 and paht g 2-6.3 disassembling and assembling
Also for Danfoss PAH Series: Instructions Manual (12 pages), Disassembling And Assembling Instructions (20 pages)

Print Page
Danfoss PAH Series Service Manual
Instruction
Disassembling and assembling PAH 2-6.3, PAHT 2-6.3, PAHT C 2-6.3 and PAHT G 2-6.3
13. Place the screw in the center hole.
Alignment
hole
Guide pin
15. Mount the pump housing using the pin
as guide.
17. Tighten the screws to a torque of 13 Nm.
180R9094 / 521B0985 / DKCFN.PI.011.N5.02 / 09.2015
14. Tighten to a torque of 10 ±1 Nm.
16. Press the housing down by hand and
insert the screws.
18. Mount the two O-rings in the flange and
the O -ring on the front cover.
13