Danfoss PAHT 10-12.5 Disassembling And Assembling Instructions - Page 3

Browse online or download pdf Disassembling And Assembling Instructions for Water Pump Danfoss PAHT 10-12.5. Danfoss PAHT 10-12.5 20 pages.

Print Page

Service guide | Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5

Disassembling the

pump

1. Tools required for dismantling.

3. Dismantle the front cover using a vice.

5. Remove the two small O-rings from the

flange. Remove the seal from the front

cover using a screwdriver.

180R9095 | 521B0986 0 | DKCFN.PI.010.NA4.02| 06.2017

2. Remove the parallel key and unscrew the

front cover.

4. Remove the shaft seal using two

screw drivers.

Caution: Avoid scratching the sealing

surface on the shaft.

6. Unscrew the four screws for the housing.